© 2024 VideoMan | Contact / Contact: info@videoman.gr | Privacy Policy | Terms Of Use
Loading the player...
Tungsten arc welding
(15) | 21/03/2021 | Translate: This is a TIG welding (ή GTAW), using a tungsten electrode and argon gas. The electrode together with the weld metal form an electrical circuit, and an electric arc is created at the point of welding. In this welding method the arc melts the welded metal, and not the electrode. Argon gas comes out of the welding gun, and is used to protect molten metal from oxidation.
Leave a Reply
1 Comment
Formation of spherical tanks using explosives Hydromorphism with explosives, also known as HERF (High Energy Rate Forming), or exploformation, is an alternative to the more traditional metal hydroforming. Unlike the older method, where the metal is formed by means of a pressurized hydraulic fluid pumped into a forming chamber, the HERF technique uses an explosive charge to generate the required pressure. Although the explosive charge is relatively small, is capable of producing sufficient power to convert these gas tanks into a spherical shape.- Coloring screws with the method of anodizing Anodization is primarily a method of protecting metal from oxidation, but it can be used as a good way to color. In the process of anodizing the metal is placed in an acid bath, and the electric current is achieved by the interference of surface molecules and the creation of a glossy protective film. This film stabilizes the metal and prevents further oxidation. By adding suitable substances, They can achieve impressive superficial coloring of anodized metal.
- A shot at 73.000 fps The Adam Savage and Jamie Hyneman from the Mythbusters tv show, record some impressive footage in slow motion capturing a bullet leaves the barrel of a gun, to 73.000 frames per second. At these speeds, the video reveals the gases, the flame and the motion of the sphere, which is invisible to the naked eye.
- Automatic cutter for metals On a roof of hellenite, a worker cuts a piece of sheet metal into a corrugated shape using an electric cutter.
- The strength of the current How electricity can melt metals. In this particular case, voltage is low (around 2 volts) but the volume too high (400 Amp).
- Explosion from a gas leak inside a car The explosion inside a car in slow motion, when his driver lights a cigarette. The explosion was caused by a gas leak in the vehicle. Fortunately, the driver and the co-driver managed to get out of the car quickly without being seriously injured..
- Automatic welding A welder uses a trick to glue two pieces of metal in parallel.
- Electric arc furnace The electric arc furnace is a huge refractory boiler in which metals from three huge graphite electrodes are melted. You can also see in the video a cooling system that constantly sprays water on the surface of the electrodes. The smelting furnace is used for smelting scrap and ore. Its biggest disadvantage is the huge energy consumption and electric melting is efficient only when carried out on a large scale. The theoretical amount of energy required to melt 1 ton of waste is 300 kWh.
- Inflating a 900 kg tire with the ignition method Using a flammable gas spray, a man sets fire to the inside of a large tire in order to inflate it. The air inside the tire expands, and the tire fits on the rim for a few seconds. This time is enough to then add air from the valve, and inflate the tire.
- Laser welding of metals The process of welding two metals with a laser. Laser welding is categorized as thermal conductivity welding or deep welding. In thermal conductivity welding, the laser beam melts the surface of the metal. The molten metals flow together and the solidified melt permanently binds the material. In terms of quality, speed and economy, Laser welding systems are superior to conventional processes for industrial use.
- An off-duty police officer shoots two armed robbers (Uruguay) At a restaurant in Montevideo, Uruguay, a policeman and his son eat ice cream when two armed robbers arrive in front of them. The policeman, watching them, he reacted quickly when one of them pulled out a pistol and aimed it at him. From the two robbers, one escaped and the other lost consciousness a few blocks later. He is being held in hospital, where a bullet was removed from his chest. Unfortunately, this is a common method of robbery that occurs daily in Uruguay.
- Construction of a large metal sphere The construction of a spherical gas tank from metal. To take its spherical shape, the tank is filled with water, and explosives are placed in its center. The explosives are detonated, and according to Bernoulli's law the pressure of water during the explosion spreads the volume of the metal evenly.
- The ancestor of the drill The arc drill is the ancestor of today's electric drill, and its use was first observed in constructions from 2000-2500 BC. The arc drill consists of a handle, an axis and a simple arc.
- How to quickly inflate the tire of a tractor On a deflated rubber tractor, it is difficult to apply the tire to the rim just airtight before air is added. A quick method is to ignite the interior with a flammable gas, so that the expanding air forms an airtight compound for a few seconds.
- An original screwdriver from China All electric screwdrivers are gun-shaped. But this screwdriver from China and has the appearance of a gun.
Hello
Where do I find such a welding machine