© 2024 VideoMan | Contact / Contact: info@videoman.gr | Privacy Policy | Terms Of Use
Loading the player...
Coloring screws with the method of anodizing
(19) | 12/06/2018 | Translate: Anodization is primarily a method of protecting metal from oxidation, but it can be used as a good way to color.
In the process of anodizing the metal is placed in an acid bath, and the electric current is achieved by the interference of surface molecules and the creation of a glossy protective film. This film stabilizes the metal and prevents further oxidation. By adding suitable substances, They can achieve impressive superficial coloring of anodized metal.
Leave a Reply to Sergio Cancel reply
7 Comments
Tungsten arc welding This is a TIG welding (ή GTAW), using a tungsten electrode and argon gas. The electrode together with the weld metal form an electrical circuit, and an electric arc is created at the point of welding. In this welding method the arc melts the welded metal, and not the electrode. Argon gas comes out of the welding gun, and is used to protect molten metal from oxidation.- Automatic cutter for metals On a roof of hellenite, a worker cuts a piece of sheet metal into a corrugated shape using an electric cutter.
- The strength of the current How electricity can melt metals. In this particular case, voltage is low (around 2 volts) but the volume too high (400 Amp).
- Store owner shoots robber 80-year-old California liquor store owner shoots armed robber. As the robbers reached his shop, owner Craig Cope was watching them on cameras and was already armed with his rifle. When the robber entered the store with a gun, the owner shot him, injuring him in the arm. The 80-year-old reportedly suffered a heart attack shortly after the incident. He was rushed to the hospital and is in good health.
- Drunk confuses an electrical transformer with a toilet A drunk man tried to defecate on an exposed electrical transformer. The strong trend threw him away and set fire to his clothes, but fortunately he survived.
- Fast driving with an electric single cycle A man drives very fast on an electric unicycle on the streets of Sutton, England. Without any protection, a fall at this speed could have bad consequences for the rider.
- Joining wood without screws A method of connecting wood without screws used in Japan.
- Electric arc furnace The electric arc furnace is a huge refractory boiler in which metals from three huge graphite electrodes are melted. You can also see in the video a cooling system that constantly sprays water on the surface of the electrodes. The smelting furnace is used for smelting scrap and ore. Its biggest disadvantage is the huge energy consumption and electric melting is efficient only when carried out on a large scale. The theoretical amount of energy required to melt 1 ton of waste is 300 kWh.
- Formation of spherical tanks using explosives Hydromorphism with explosives, also known as HERF (High Energy Rate Forming), or exploformation, is an alternative to the more traditional metal hydroforming. Unlike the older method, where the metal is formed by means of a pressurized hydraulic fluid pumped into a forming chamber, the HERF technique uses an explosive charge to generate the required pressure. Although the explosive charge is relatively small, is capable of producing sufficient power to convert these gas tanks into a spherical shape.
- Testing the screw technique A man tries to open a bottle of wine without a corkscrew, screwing a screw to the cork and pulling it with pliers. The method will work, but will accidentally hit the bottom of the bottle on the kitchen counter.
- Running on an electric unicycle is not a good idea A man proves how unsafe an electric unicycle can be, with which he moves at high speed on a road.
- He wanted to remove the pepper with a vacuum cleaner A woman dropped accidentally excessive pepper omelet on the, and thought it would be a good idea to remove it with a vacuum cleaner.
- The burnt electric motor An electric motor seems to get too hot. A qualified technician will check that all is well inside.
- The most effective hand washing for coronavirus With this method you are guaranteed protection against all the dangerous viruses.
- How to unload a concrete pipe This worker has no special equipment to unload a large concrete pipe, so using his own method. Pushing the tube from the trailer on two stacks of six well mounted resiliently, that prevent sharp fall.
Hello, my name is Luciano and I would like to learn about this type of anodizing process in advance, thank you very much.
OYE, THANKS FOR THE INFO, BUT I WOULD LIKE TO KNOW THE STEP BY STEP TO CHANGE THE COLOR OF THE SCREWS AND NUTS, I REBUILD COMPRESSORS AND WOULD LIKE TO BE ABLE TO OFFER THAT TERMINATION.
Hello, But what acid do you use?
How to anodize screws? to go black?
Hello, I'm interested in knowing how that process is, I have a car parts store and they have asked me to do that process. It is a very cool thing and in my rally car the screws wanted precious at the same time as they intended. And that if you could explain the process to me, liquids, current power, Thank you,
How to leave black screws?
How colors are achieved