©; 2024 VideoMan | Contact / Contact: info@videoman.gr | Privacy Policy | Terms Of Use
Loading the player...
Repairing an old pipe with resin
(11) | 21/02/2022 | Translate: Repair of an old pipe with a balloon coated with epoxy resin. The balloon is inserted from one side and covers the entire length of the tube until it is completely covered with the resin. The resin is left to harden for a few hours and the new inner coating is ready.
Leave a Reply to Alejandro Cancel reply
3 Comments
Making a table from old cell phones Alternative recycling of old mobile phones, by making a table top from epoxy resin.- Repair of an Omega watch that burned in a fire Interesting downloads from the repair of a burnt old Omega Seamaster watch in the hands of a professional watchmaker.
- What happens if you heat an old silver knife Many old silver knives containing resin inside the handle for welding the blade. The resin, which is a form of hard pine resin, It acts as an adhesive and filler. Occasionally the resin can be added sand or even a piece of lead weight. when heated, the resin softens and expands. In this case it appears that even arrived at boiling point, causing a sharp expansion.
- The complete restoration of an old Range Rover The engineer Goerge Karellas from Ireland restores a Range Rover Vogue SE 1991, while turning the whole process into a impressive stop-motion video. The video is quite large (1 hour and 30 minutes) but worth a watch even briefly.
- Tricycle converted to off-road vehicle The Mathis from Germany bought an old tricycle Piaggio Ape and made several fixes and improvements to move easily over rough road. With 9.000 photos, the Mathis created a fun stop motion film to show us how did this transformation.
- Teslon: a Honda Accord with Tesla Motor The Jimmy Built put the engine of a Tesla electric car in an old Honda Accord. Result; The 0-100 km / h in 2,7 seconds.
- Rebuilding the engine of a scarab After countless hours of work, Experienced engineers reconstruct the old engine of a VW Beetle toy 1973 and our present in a timelapse. Many parts of the engine had to be changed with new, as the frame of magnesium, which was replaced by an aluminum frame.
- Manufacture of a hydraulic arm cardboard and syringes How can one build a robotic arm cardboard, which is quite entertaining as a game. For construction needs cardboard, 8 syringes, an old battery, 4 hoses, small wood, glue and ... patience.
- In a ship's cabin in storm time The sailor Edward recorded inside the cabin in a freighter, during a storm in the North Sea. All objects appear to be alive, and to move from one side of the cabin to the other. In these circumstances, it is difficult to sleep, so Edward tries to clean the cabin. But the task becomes even more difficult.
- China: Correct bridge in 43 hours The renovation of Sanyuan bridge in Beijing, launched on 23:00 on November 13, 2015. The whole conversion process was completed within 24 hours. The new surface weight of over 1300 tons moved on site to replace the old.
- The new door for cats failed A man records the reaction of his cat Friends, having spent half an hour to install a small door for cats at the entrance of the House. Unfortunately Friends, prefers to keep his old habits ...
- A small child discovers an old phone A little boy of 8 years discovers surprised a payphone, and does not understand what is. While examining the mysterious object for a long time, the handset seems very strange and he looks.
- How tattoos are imprinted on our skin; The oldest recorded 6 tattoo.000 e.g., and found a mummy in Peru. Whereas people lose about 40.000 skin cells per hour, How can the tattoo to last forever; Here we see in detail various methods and equipment used to capture permanent ink on our skin.
- The dog and the balloon A French Bulldog trying to catch a balloon that is inflated with helium and tied to his collar. This perpetual system can keep your dog busy for many hours..
- Restoration of an old photo in Photoshop Process of restoration and colorization of an old black and white photo in Photoshop. This work lasted approximately two hours.
I would like to have more information
I would like to know the costs and if there are companies in Cagliari and its province that are accredited to do this process and how many millimeters thick it is
Is incredible!
could you tell more, specifying the technique and properties of the balloon, Thank you.